Tri-Power Gym SQMIZE® PREMIUM BISON SQ-S981-90, cable pull station 1:1, multi-press & half rack, height 226 cm
Tri-Power Gym SQMIZE® PREMIUM BISON SQ-S981-90, cable pull station 1:1, multi-press & half rack, height 226 cm
€3,099.95
% €4,385.95* (29.32% saved)
Available, delivery time: 2-5 Tage
Tri-Power Gym SQMIZE® PREMIUM BISON SQ-S981-90 – Half Rack, Linear Smith Machine and Dual Cable Pulley System with 1:1 Ratio and 2 x 90 kg, Height 226 cm
Half Rack, Linear Smith Machine and dual cable pulley system with two 90 kg weight stacks: The Tri-Power Gym SQMIZE® PREMIUM BISON SQ-S981-90 combines three commercial gym stations in a single frame made from 75 x 75 mm steel profiles with a 3 mm wall thickness. The station weighs 425 kg, stands 226 cm tall and is certified according to EN ISO 20957. The cable pulley system operates with a 1:1 ratio – the selected weight on the stack is the resistance at the handle.
Stainless Steel Front Uprights
The two front uprights are made of stainless steel. This is an unusual feature in fitness equipment of this class and immediately stands out in any gym. Even after years of commercial use, the surface remains resistant to sweat and cleaning agents, whereas powder-coated steel may eventually show signs of wear at frequent contact points.
Permanent Laser Heat Marking Instead of Stickers
The numbering of the adjustment holes is created using a laser heat-marking process. Instead of paint or stickers, the steel features a heat-induced oxide layer permanently integrated into the material. The markings cannot simply be wiped off or worn away – even after ten years of use, the numbers remain as legible as on the first day.
Half Rack: 25 Height Positions, J-Cups Rated up to 400 kg
For free-weight barbell training, 25 height adjustment positions are available, with hole spacing of 50 mm center to center. The Sandwich J-Cups support loads of up to 400 kg and feature all-around nylon protection to preserve your barbell's knurling. The Spotter Arms provide a 58 cm support surface and are also equipped with nylon pads – allowing you to perform squats and bench presses close to your limits, even without a training partner.
The internal width is 110 cm. This provides ample room for squats and pressing movements without coming into contact with the uprights.
Monkey Bar and Pull-up Bar
Two pull-up bars are mounted above the rack. The Monkey Bar measures 109 cm in width and features rubber-coated grips measuring 16.5 cm in length. The additional Pull-up Bar has a smooth surface without knurling. Two bars with different grip characteristics allow you to switch between wide, narrow and neutral-grip pull-ups without modifying the setup.
Linear Smith Machine with 20 kg Barbell
The Smith Machine operates on linear bearings. This design keeps the barbell on a fixed path throughout the entire movement, even when the applied force is not perfectly centered. The guided barbell has a net weight of 20 kg – an important factor to include when calculating your training load, particularly during sets close to your maximum. The grip diameter is 28 mm, while the loadable sleeves measure 32 cm in length and accommodate 50 mm weight plates. The barbell can be racked at 12 different height positions.
Dual Cable Pulley System with 1:1 Ratio
Two independent weight stacks of 90 kg each form the core of the station, with each stack consisting of 18 plates weighing 5 kg each. The pulley ratio is 1:1: The weight selected on the stack corresponds to the resistance at the handle. This makes weight selection straightforward, without the need for mental calculations, and provides access to the full weight stack for heavy lat pulldowns.
Because both weight stacks operate independently, unilateral exercises, asymmetrical loading and bilateral training can be performed without modifying the setup. Aluminum pulleys ensure smooth movement, even when both sides are loaded to their maximum capacity.
Single-Hand Height Adjustment Carriage
The pulley height is adjusted using a single-hand carriage mechanism. One hand is all you need, leaving the other free to hold the handle – a noticeable advantage during training compared with systems that require two-handed adjustments and repositioning.
Dimensions, Frame and Certification
The station measures 132 cm in width at the rack, extending to approximately 201 cm including the Smith Machine barbell. The depth is 138 cm and the height is 226 cm. The adjustment holes have a diameter of 25 mm with 50 mm center-to-center spacing. EN ISO 20957 certification is generally a requirement for commercial gym operators when installing fitness equipment.
Technical Specifications
Overall Dimensions and Frame
| Feature | Specification |
|---|---|
| Series | PREMIUM BISON |
| Height | 226 cm |
| Width | 132 cm (Rack), approx. 201 cm including Smith Machine barbell |
| Depth | 138 cm |
| Internal Width | 110 cm |
| Frame Profile | 75 x 75 mm |
| Wall Thickness | 3 mm |
| Front Uprights | Stainless Steel |
| Markings | Laser Heat Marking, permanent oxide layer |
| Station Weight | 425 kg |
| Hole Pattern | Ø 25 mm, spacing 50 mm (center to center) |
| Certification | EN ISO 20957 |
Half Rack
| Feature | Specification |
|---|---|
| Height Adjustment Positions | 25 |
| Hole Pattern | Ø 25 mm, spacing 50 mm (center to center) |
| Sandwich J-Cups | Load capacity up to 400 kg, all-around nylon protection |
| Spotter Arms | 58 cm support surface, with nylon pads |
| Monkey Bar | 109 cm width, 16.5 cm rubber-coated grips |
| Pull-up Bar | Additional bar, without knurling |
Linear Smith Machine
| Feature | Specification |
|---|---|
| Guidance System | Linear Bearings |
| Barbell Net Weight | 20 kg |
| Grip Diameter | 28 mm |
| Weight Plate Sleeves | 50 mm, loadable length 32 cm |
| Height Adjustment Positions | 12 |
Dual Cable Pulley System
| Feature | Specification |
|---|---|
| Weight Stacks | 2 x 90 kg, independently operated |
| Weight Plates | 18 plates of 5 kg each per stack |
| Pulley Ratio | 1:1 |
| Resistance at Handle | Up to 90 kg per side |
| Pulleys | Aluminum |
| Height Adjustment | Single-Hand Adjustment Carriage |
Included in Delivery
| Item | Specifications |
|---|---|
| Sandwich J-Cups | Load capacity up to 400 kg, all-around nylon protection |
| Spotter Arms | 58 cm support surface, with nylon pads |
| Monkey Bar | 109 cm width, rubber-coated grips |
| Pull-up Bar | Without knurling |
| Dual Cable Pulley System | 2 x 90 kg, integrated |
Optional Accessories
The accessories from the SQ-S955 series are designed for the 75 x 75 mm steel profile and are compatible with all stations in our SXXX series – including the SQ-S981-90.
| Item Code | Function |
|---|---|
| SQ-S955-SJ | Sandwich J-Cups: Barbell supports with all-around protection |
| SQ-S955-NJ | Roller J-Cups: Barbell supports with rollers for lateral barbell centering |
| SQ-S955-SA | Safety Arms: Safety supports for training outside the rack |
| SQ-S955-LEQ | Jammer Arms: Heavy-duty safety supports with nylon protection |
| SQ-S955-LM | Landmine: Pivoting attachment for 50 mm barbells |
| SQ-S955-LE | Lever Arms: Height-adjustable lever arms with 50 mm weight plate sleeves |
| SQ-S955-SWA | Swivel Free Arms: Freely pivoting arms for guided pushing and pulling movements |
| SQ-S955-BHL | 3-in-1 Trainer Attachment: Combined attachment for three exercise variations |
| SQ-S955-LAS | Lat Pulldown Seat: Height-adjustable, with knee pads |
| SQ-S955-BOS | Bent-over Seated Row: Chest support pad for bent-over rowing exercises |
| SQ-S955-LEX | Leg Extension: Attachment for leg extensions and leg curls, with 50 mm weight plate sleeves |
| SQ-S955-BSM | Belt Squat: Lever arm for knee- and back-friendly squats and rowing exercises |
| SQ-S955-LP | Leg Press: Attachable footplate for the Smith Machine |
| SQ-S955-BH | Bar Holder: Vertical holder for a 50 mm barbell |
| SQ-S955-WH | Weight Plate Holders: Chrome-plated storage sleeves for 50 mm weight plates |
| SQ-S955-BP | Band Pegs: Steel pegs for resistance bands or chains |
You can find compatible cable handles and additional accessories in our Cable Pulley Accessories category.
- Three commercial gym stations in one frame: Half Rack, Linear Smith Machine and Dual Cable Pulley System
- Dual cable pulley system with 1:1 ratio – 90 kg on the weight stack means 90 kg at the handle
- Stainless steel front uprights, adjustment holes with permanent laser heat markings
- Sandwich J-Cups rated up to 400 kg and Spotter Arms with a 58 cm support surface included
- EN ISO 20957 certified, 425 kg station weight, frame made from 75 x 75 x 3 mm steel profiles
0 of 0 reviews
Average rating of 0 out of 5 stars
Login