Skip to main content Skip to search Skip to main navigation

Functional Wall Twin Power SQMIZE® PREMIUM BISON SQ-S755-90, Höhe 204 cm

SQMIZE® PREMIUM BISON SQ-S755-90 Functional Wall Twin Power, Height 204 cm

A Functional Trainer and a Half Rack are normally two separate pieces of equipment. Two footprints, two locations, two planning decisions. The SQ-S755-90 combines them into a single wall-mounted unit: 141 cm wide, 75 cm deep and 204 cm high. Behind it is the wall. In front of it is your training space. Between the two stands 375 kg of steel, constructed from 75 x 75 x 3 mm profiles.

Two Machines, One Wall

The combination is what really matters. Anyone performing squats and bench presses in the rack does not want to walk across the room to continue training at a cable machine. Here, both are in the same place, facing the same direction. One heavy set in the rack, followed by a set on the cable machine, without wasting time moving between stations.

For gym floor planning, this means one location on the floor plan instead of two. For a 15 m² home gym, it means having both training options becomes possible in the first place.

90 kg Per Side

Each side has its own 90 kg weight stack, consisting of 18 cast iron plates weighing 5 kg each. Every plate is marked with its weight in kilograms and runs on its own guide bushing. The stacks operate independently – the left side can be set to a different weight than the right, and during unilateral training, the opposite side remains unaffected.

The pulley ratio is 2:1. This provides finer resistance increments at the handle compared to the 5 kg weight plates, which is particularly important when progressing in small steps: shoulder exercises, rotator cuff training and rehabilitation.

How the Cable Movement Feels

Ball-bearing aluminum pulleys. Nylon-coated steel cables. Just two lines in a specification table, but they make the difference between a cable machine you enjoy using and one you avoid. Resistance engages without delay and remains consistent throughout the entire range of motion.

The nylon coating protects the cable where the greatest stress occurs: at the pulleys. It prevents direct friction against the bare steel and therefore plays a decisive role in the cable's service life.

Adjustment is made using the ball-bearing, single-hand adjustable pulley carriage, with 25 positions from floor level to above head height and a Dual Pulley system on each side. Pulling and pushing, unilaterally or bilaterally, from a squat position or overhead. Adding a training bench expands the exercise options to include cable flyes and seated rows.

The Hole Pattern

From 33 to 188 cm, with a 26 mm diameter hole every 5 cm, each position individually numbered by laser engraving. Numbering may sound like a minor detail until three people share the same rack. Then it becomes the reason nobody has to count holes before every set and why both sides can be adjusted to exactly the same height.

The internal rack width is 109 cm and accommodates Olympic barbells measuring 220 cm in length. The integrated pull-up bar has a diameter of 35 mm and a length of 109 cm, with a powder-coated finish that provides grip even when your hands are no longer dry.

Installation

The unit is assembled using M24 bolts, and eight heavy-duty hammer-in anchors are included. Without a rear support foot, no additional floor space is occupied behind the equipment, while the area in front remains completely unobstructed – no support frame to trip over when stepping backward into a lunge.

The wall must be capable of supporting the load. An equipment weight of 375 kg plus training loads is not comparable to mounting a shelf, and the wall structure must be assessed before installation, not afterward.

Quiet Enough for Ground-Floor Training Areas

Plastic buffers are positioned between the weight plates, while plastic bushings guide the weights. The stack moves quietly and settles with reduced impact noise. Where offices are located below the training room, hotel rooms above it or a treatment room next door, this can be a deciding factor in whether a cable machine can be installed in that location.

What's Included

Sandwich J-Cups with full nylon protection. Square Spotter Arms made from 75 x 75 x 3 mm steel profiles with nylon protection, 60 cm long and 7 cm wide. The integrated pull-up bar. A Landmine attachment with a 50 mm barbell sleeve and 30 cm tube length. Two single-hand cable handles.

Technical Specifications

Overall Dimensions and Frame
Width 141 cm
Depth 75 cm
Height 204 cm
Weight 375 kg
Steel Profile 75 x 75 mm
Wall Thickness 3 mm
Installation Wall-mounted, M24 bolt diameter
Finish Powder-coated, black
Standard EN ISO 20957
Half Rack
Barbell Positions 25, with laser-engraved numbering
Hole Spacing 5 cm, center to center
Hole Diameter Ø 26 mm
Height of First Hole 33 cm
Height of Last Hole 188 cm
Internal Rack Width 109 cm
Pull-up Bar Ø 35 mm, length 109 cm, powder-coated
Cable Pulley System
Weight Stacks 2 x 90 kg, independently adjustable
Weights per Stack 18 cast iron plates weighing 5 kg each, with guide bushings and kilogram markings
Pulley Ratio 2:1
Pulleys Aluminum, ball-bearing mounted
Cables Steel cables, nylon-coated
Pulley Carriage Height Adjustment 25 positions, ball-bearing carriage with single-hand adjustment
Pulley Configuration Dual Pulley on each side
Noise Reduction Plastic bushings and buffers between the weight plates
Accessories Included in Delivery
Sandwich J-Cups With full nylon protection
Spotter Arms Square 75 x 75 x 3 mm steel profiles, length 60 cm, width 7 cm, with nylon protection
Pull-up Bar Integrated, Ø 35 mm, length 109 cm
Landmine 50 mm barbell sleeve, tube length 30 cm
Single-Hand Cable Handles 2 pieces
Mounting Hardware 8 hammer-in anchors

Installation Note

The eight hammer-in anchors supplied are intended for standard installation conditions. Lightweight partition walls, hollow-core masonry blocks or older building structures may require different fastening systems – this must be assessed by a qualified professional before installation.

Optional Accessories

The station can be expanded step by step. The following attachments are not included in delivery:

Item Number Function
SQ-S955-LE Lever Arms Height-adjustable lever arms with 50 mm weight plate sleeves for guided strength training
SQ-S955-BSM Belt Squat Lever arm for knee- and back-friendly squats and rowing exercises
SQ-S955-LEX Leg Extension Attachment for leg extensions and leg curls with 50 mm weight plate sleeves
SQ-S955-LAS Lat Pulldown Seat Height-adjustable seat with knee pads for expanding the cable pulley station
SQ-S955-BOS Bent-over Seated Row Chest support pad for stable bent-over rowing exercises on the cable machine
SQ-S955-SJ Sandwich J-Cups Barbell supports with all-around protection for the barbell and rack
SQ-S955-NJ Roller J-Cups Barbell supports with rollers for lateral barbell centering
SQ-S955-LM Landmine Pivoting attachment for 50 mm barbells, designed for core and rowing exercises
SQ-S955-SA Safety Arms Safety supports for training outside the rack
SQ-S955-LEQ Jammer Arms Heavy-duty safety supports with nylon protection for training outside the rack
SQ-S955-BH Bar Holder Vertical holder for a 50 mm barbell, mounted directly on the rack
SQ-S955-WH Weight Plate Holders Chrome-plated storage sleeves for 50 mm weight plates, mounted on the rack
SQ-S955-BP Band Pegs Steel pegs for attaching resistance bands or chains

Additional cable handles beyond the two single-hand handles included are not supplied. You can find our selection at simpleproducts.de/kabelzug-zubehoer.

  • Half Rack and Functional Trainer combined in one wall-mounted unit
  • Two independent 90 kg weight stacks, each with 18 cast iron plates
  • 25 pulley carriage height positions, Dual Pulley system on each side
  • 109 cm internal rack width, mounting holes from 33 to 188 cm with 5 cm spacing
  • 375 kg equipment weight, frame constructed from 75 x 75 x 3 mm steel profiles

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Passendes Zubehör

Lat Pulldown and Leg Extension Seat SQMIZE® SQ-S955-LBS
Lat Pulldown and Leg Extension Seat SQMIZE® SQ-S955-LBS

€359.95
Leg Roller SQMIZE® SQ480LR
Leg Roller SQMIZE® SQ480LR

€226.95
Power Gym Bar Holder Attachment SQMIZE® SQ-S955-BH
Power Gym Bar Holder Attachment SQMIZE® SQ-S955-BH

€34.95
Power Gym Belt Squat Supplement SQMIZE® SQ-S955-BSM
Power Gym Belt Squat Supplement SQMIZE® SQ-S955-BSM

€299.95
Power Gym Bent-over Seat Row SQMIZE® SQ-S955-BOS
Power Gym Bent-over Seat Row SQMIZE® SQ-S955-BOS

€239.95
Power Gym Landmine SQMIZE® SQ-S955-LM
Power Gym Landmine SQMIZE® SQ-S955-LM

€89.95
Power Gym Lever Arms SQMIZE® SQ-S955-LE
Power Gym Lever Arms SQMIZE® SQ-S955-LE

€369.95
Power Gym Monolift SQMIZE® SQ-S955-ML
Power Gym Monolift SQMIZE® SQ-S955-ML

€299.95
SALE
Power Gym Roller J-Cups SQMIZE® SQ-S955-NJ
Power Gym Roller J-Cups SQMIZE® SQ-S955-NJ

€125.95 Regular price: €159.95 (21.26% saved)
Power Gym Rowing Footplate SQMIZE® SQ-S955-ROW
Power Gym Rowing Footplate SQMIZE® SQ-S955-ROW

€139.95
Power Gym Swivel Jammer Arms SQMIZE® PREMIUM BISON SQ-S955-LEQ
Power Gym Swivel Jammer Arms SQMIZE® PREMIUM BISON SQ-S955-LEQ

€369.95
SALE
BLACK MONTH
Power Rack Monolift SQMIZE® SQ480ML
Power Rack Monolift SQMIZE® SQ480ML

€259.95 Regular price: €387.95 (32.99% saved)
SALE
Premium Monster Power Gym Monolift SQMIZE® SQ-S991-ML
Premium Monster Power Gym Monolift SQMIZE® SQ-S991-ML

€256.95 Regular price: €480.95 (46.57% saved)
SQMIZE® Power Gym Band Pegs SQ-S955-BP
SQMIZE® Power Gym Band Pegs SQ-S955-BP

€40.95
SQMIZE® Power Gym Safety Arms SQ-S955-SA
SQMIZE® Power Gym Safety Arms SQ-S955-SA

€139.95
SQMIZE® Power Gym Sandwich J-Cups SQ-S955-SJ
SQMIZE® Power Gym Sandwich J-Cups SQ-S955-SJ

€99.95
SQMIZE® SQ-S955-WH Weight Plate Holders (1 pair), 50 mm
SQMIZE® SQ-S955-WH Weight Plate Holders (1 pair), 50 mm

€49.95

Servus nach Österreich! 🇦🇹 Entdecke unser Sortiment direkt in unserem AT-Shop. Nutze Beratung und Kundendienst direkt vor Ort!