Functional Wall Twin Power SQMIZE® PREMIUM BISON SQ-S755-90, Höhe 204 cm
Functional Wall Twin Power SQMIZE® PREMIUM BISON SQ-S755-90, Höhe 204 cm
€1,699.95
% €2,599.95* (34.62% saved)
Available, delivery time: 2-5 Tage
SQMIZE® PREMIUM BISON SQ-S755-90 Functional Wall Twin Power, Height 204 cm
A Functional Trainer and a Half Rack are normally two separate pieces of equipment. Two footprints, two locations, two planning decisions. The SQ-S755-90 combines them into a single wall-mounted unit: 141 cm wide, 75 cm deep and 204 cm high. Behind it is the wall. In front of it is your training space. Between the two stands 375 kg of steel, constructed from 75 x 75 x 3 mm profiles.
Two Machines, One Wall
The combination is what really matters. Anyone performing squats and bench presses in the rack does not want to walk across the room to continue training at a cable machine. Here, both are in the same place, facing the same direction. One heavy set in the rack, followed by a set on the cable machine, without wasting time moving between stations.
For gym floor planning, this means one location on the floor plan instead of two. For a 15 m² home gym, it means having both training options becomes possible in the first place.
90 kg Per Side
Each side has its own 90 kg weight stack, consisting of 18 cast iron plates weighing 5 kg each. Every plate is marked with its weight in kilograms and runs on its own guide bushing. The stacks operate independently – the left side can be set to a different weight than the right, and during unilateral training, the opposite side remains unaffected.
The pulley ratio is 2:1. This provides finer resistance increments at the handle compared to the 5 kg weight plates, which is particularly important when progressing in small steps: shoulder exercises, rotator cuff training and rehabilitation.
How the Cable Movement Feels
Ball-bearing aluminum pulleys. Nylon-coated steel cables. Just two lines in a specification table, but they make the difference between a cable machine you enjoy using and one you avoid. Resistance engages without delay and remains consistent throughout the entire range of motion.
The nylon coating protects the cable where the greatest stress occurs: at the pulleys. It prevents direct friction against the bare steel and therefore plays a decisive role in the cable's service life.
Adjustment is made using the ball-bearing, single-hand adjustable pulley carriage, with 25 positions from floor level to above head height and a Dual Pulley system on each side. Pulling and pushing, unilaterally or bilaterally, from a squat position or overhead. Adding a training bench expands the exercise options to include cable flyes and seated rows.
The Hole Pattern
From 33 to 188 cm, with a 26 mm diameter hole every 5 cm, each position individually numbered by laser engraving. Numbering may sound like a minor detail until three people share the same rack. Then it becomes the reason nobody has to count holes before every set and why both sides can be adjusted to exactly the same height.
The internal rack width is 109 cm and accommodates Olympic barbells measuring 220 cm in length. The integrated pull-up bar has a diameter of 35 mm and a length of 109 cm, with a powder-coated finish that provides grip even when your hands are no longer dry.
Installation
The unit is assembled using M24 bolts, and eight heavy-duty hammer-in anchors are included. Without a rear support foot, no additional floor space is occupied behind the equipment, while the area in front remains completely unobstructed – no support frame to trip over when stepping backward into a lunge.
The wall must be capable of supporting the load. An equipment weight of 375 kg plus training loads is not comparable to mounting a shelf, and the wall structure must be assessed before installation, not afterward.
Quiet Enough for Ground-Floor Training Areas
Plastic buffers are positioned between the weight plates, while plastic bushings guide the weights. The stack moves quietly and settles with reduced impact noise. Where offices are located below the training room, hotel rooms above it or a treatment room next door, this can be a deciding factor in whether a cable machine can be installed in that location.
What's Included
Sandwich J-Cups with full nylon protection. Square Spotter Arms made from 75 x 75 x 3 mm steel profiles with nylon protection, 60 cm long and 7 cm wide. The integrated pull-up bar. A Landmine attachment with a 50 mm barbell sleeve and 30 cm tube length. Two single-hand cable handles.
Technical Specifications
| Overall Dimensions and Frame | |
|---|---|
| Width | 141 cm |
| Depth | 75 cm |
| Height | 204 cm |
| Weight | 375 kg |
| Steel Profile | 75 x 75 mm |
| Wall Thickness | 3 mm |
| Installation | Wall-mounted, M24 bolt diameter |
| Finish | Powder-coated, black |
| Standard | EN ISO 20957 |
| Half Rack | |
|---|---|
| Barbell Positions | 25, with laser-engraved numbering |
| Hole Spacing | 5 cm, center to center |
| Hole Diameter | Ø 26 mm |
| Height of First Hole | 33 cm |
| Height of Last Hole | 188 cm |
| Internal Rack Width | 109 cm |
| Pull-up Bar | Ø 35 mm, length 109 cm, powder-coated |
| Cable Pulley System | |
|---|---|
| Weight Stacks | 2 x 90 kg, independently adjustable |
| Weights per Stack | 18 cast iron plates weighing 5 kg each, with guide bushings and kilogram markings |
| Pulley Ratio | 2:1 |
| Pulleys | Aluminum, ball-bearing mounted |
| Cables | Steel cables, nylon-coated |
| Pulley Carriage Height Adjustment | 25 positions, ball-bearing carriage with single-hand adjustment |
| Pulley Configuration | Dual Pulley on each side |
| Noise Reduction | Plastic bushings and buffers between the weight plates |
| Accessories Included in Delivery | |
|---|---|
| Sandwich J-Cups | With full nylon protection |
| Spotter Arms | Square 75 x 75 x 3 mm steel profiles, length 60 cm, width 7 cm, with nylon protection |
| Pull-up Bar | Integrated, Ø 35 mm, length 109 cm |
| Landmine | 50 mm barbell sleeve, tube length 30 cm |
| Single-Hand Cable Handles | 2 pieces |
| Mounting Hardware | 8 hammer-in anchors |
Installation Note
The eight hammer-in anchors supplied are intended for standard installation conditions. Lightweight partition walls, hollow-core masonry blocks or older building structures may require different fastening systems – this must be assessed by a qualified professional before installation.
Optional Accessories
The station can be expanded step by step. The following attachments are not included in delivery:
| Item Number | Function |
|---|---|
| SQ-S955-LE Lever Arms | Height-adjustable lever arms with 50 mm weight plate sleeves for guided strength training |
| SQ-S955-BSM Belt Squat | Lever arm for knee- and back-friendly squats and rowing exercises |
| SQ-S955-LEX Leg Extension | Attachment for leg extensions and leg curls with 50 mm weight plate sleeves |
| SQ-S955-LAS Lat Pulldown Seat | Height-adjustable seat with knee pads for expanding the cable pulley station |
| SQ-S955-BOS Bent-over Seated Row | Chest support pad for stable bent-over rowing exercises on the cable machine |
| SQ-S955-SJ Sandwich J-Cups | Barbell supports with all-around protection for the barbell and rack |
| SQ-S955-NJ Roller J-Cups | Barbell supports with rollers for lateral barbell centering |
| SQ-S955-LM Landmine | Pivoting attachment for 50 mm barbells, designed for core and rowing exercises |
| SQ-S955-SA Safety Arms | Safety supports for training outside the rack |
| SQ-S955-LEQ Jammer Arms | Heavy-duty safety supports with nylon protection for training outside the rack |
| SQ-S955-BH Bar Holder | Vertical holder for a 50 mm barbell, mounted directly on the rack |
| SQ-S955-WH Weight Plate Holders | Chrome-plated storage sleeves for 50 mm weight plates, mounted on the rack |
| SQ-S955-BP Band Pegs | Steel pegs for attaching resistance bands or chains |
Additional cable handles beyond the two single-hand handles included are not supplied. You can find our selection at simpleproducts.de/kabelzug-zubehoer.
- Half Rack and Functional Trainer combined in one wall-mounted unit
- Two independent 90 kg weight stacks, each with 18 cast iron plates
- 25 pulley carriage height positions, Dual Pulley system on each side
- 109 cm internal rack width, mounting holes from 33 to 188 cm with 5 cm spacing
- 375 kg equipment weight, frame constructed from 75 x 75 x 3 mm steel profiles
0 of 0 reviews
Average rating of 0 out of 5 stars
Login