Skip to main content Skip to search Skip to main navigation

Weight Plate Storage Rack 50 mm SQMIZE® SQ209

Commercial Weight Plate Storage Rack SQMIZE® SQ209 for 50 mm Weight Plates

The SQMIZE® SQ209 commercial weight plate storage rack holds six sets of weight plates and one barbell in a single location. Its triangular frame has a footprint of 85 × 85 cm and stands 81 cm high, below eye level, keeping the view across the training area unobstructed. The anthracite hammer-tone finish gives it a look that fits right in with the rest of the gym equipment.

Six Storage Pegs for Plates up to 450 mm

Three pegs on each side, each 20 cm long and 45 mm in diameter, accommodate weight plates conforming to the Olympic 50 mm standard. Plates with a full diameter of 450 mm fit on all six pegs, including bumper plates as well as cast iron and steel plates. The pegs are angled slightly upward, keeping the plates securely against the frame and stable in place.

Each peg comes with a spring collar. All six collars therefore have their own designated storage position, right where you load the plates.

Vertical Barbell Storage in the Center

A sleeve at the center of the base cross provides vertical storage for a barbell. A second tube at the top of the frame guides the upper end of the bar, while the included metal pin secures it against slipping sideways. This keeps the barbell off the floor and within easy reach alongside the weight plates.

Frame and Stability

The frame is made of steel tubing with a 50 × 25 mm profile and a wall thickness of 2 mm. The entire rack has a static load capacity of up to 450 kg. Its triangular design distributes the load downward through the wide base, and the rack itself weighs 10.7 kg. Each foot has a mounting hole, allowing the SQ209 to be bolted to the floor if required.

Technical Specifications

Length 85 cm
Width 85 cm
Height 81 cm
Number of Storage Pegs 6
Peg Length 6 × 20 cm
Plate Peg Diameter Ø 45 mm, for weight plates conforming to the 50 mm standard
Plate Diameter Up to 450 mm on all pegs
Barbell Holder Vertical, centrally positioned, secured at the top with a metal pin
Frame Profile 50 × 25 mm steel tubing
Wall Thickness 2 mm
Load Capacity (Static) Up to 450 kg for the entire rack
Floor Mounting One mounting hole per foot
Weight 10.7 kg
Finish Anthracite hammer-tone finish
Scope of Delivery SQ209 commercial weight plate storage rack, 6 spring collars, metal pin, without weight plates

Care Instructions

Wipe the painted surface with a damp cloth and dry it afterward. Check the bolted connections at the frame and base cross regularly to ensure they are secure. Also check that the metal pin is properly seated in the upper holder.

At a Glance

  • 6 storage pegs, each 20 cm long, for weight plates conforming to the 50 mm standard
  • Accommodates plates up to 450 mm in diameter on every peg
  • Vertical barbell storage in the center, secured at the top with a metal pin
  • Triangular frame, 85 × 85 cm footprint, static load capacity up to 450 kg
  • Anthracite hammer-tone finish, net weight of 10.7 kg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Servus nach Österreich! 🇦🇹 Entdecke unser Sortiment direkt in unserem AT-Shop. Nutze Beratung und Kundendienst direkt vor Ort!