Mobile Weight Plate Storage Rack SQMIZE® BS500, 50 / 30 mm, Rolling Rack
Mobile Weight Plate Storage Rack SQMIZE® BS500, 50 / 30 mm, Rolling Rack
€227.95
% €277.95* (17.99% saved)
Available, delivery time: 2-5 Tage
Mobile Weight Plate Storage Rack SQMIZE® BS500 for 50 mm and 30 mm Plates, with Heavy-Duty Casters
The mobile SQMIZE® BS500 weight plate storage rack holds six sets of weight plates and two barbells on a footprint of 65 × 62 cm. Four heavy-duty casters allow you to move it wherever you need to load weights, while the locking brakes keep it securely in place. The total load capacity is 300 kg.
Six Storage Pegs for 30 mm and 50 mm Plates
The storage pegs are arranged in pairs on three levels, on either side of the central column. Their standard diameter is 30 mm, allowing them to accommodate 30 mm plates directly. Six adapters are included for the Olympic 50 mm standard, increasing the peg diameter to 49.8 mm. There is one adapter for each peg, allowing you to configure the entire rack for one plate standard.
All six pegs provide sufficient clearance for weight plates with an outside diameter of up to 450 mm. Each peg also has its own spring collar, with six included in total, so every collar has a designated storage spot.
Vertical Storage for Two Barbells
Two longer sleeves are positioned at the base of the central column, allowing you to store barbells vertically. Both bars remain within easy reach without taking up additional floor space, as they fit within the rack's footprint.
Central Column and Casters
The central column is made of round tubing with a diameter of 77 mm and supports the storage pegs on both sides. The lower frame is constructed from 80 × 40 mm and 50 × 50 mm square tubing, distributing the load across the four casters.
The ball-bearing heavy-duty casters have a diameter of 65 mm and a running width of 40 mm. They roll smoothly even when fully loaded, allowing you to move the rack, which weighs 14 kg, together with the stored weight plates.
Technical Specifications
| Height | 135 cm |
| Width | 65 cm |
| Length | 62 cm |
| Number of Storage Pegs | 6, arranged in pairs on 3 levels |
| Standard Peg Diameter | 30 mm |
| Peg Diameter with Adapter | 49.8 mm for the 50 mm standard |
| Weight Plate Diameter | Up to 450 mm on all storage pegs |
| Barbell Holders | 2 sleeves, vertical storage |
| Central Column | Round tubing, Ø 77 mm |
| Lower Frame | 80 × 40 mm and 50 × 50 mm |
| Casters | 4 ball-bearing heavy-duty casters with locking brakes |
| Caster Diameter | 65 mm |
| Caster Width | 40 mm |
| Load Capacity | Up to 300 kg for the entire rack |
| Weight | 14 kg |
| Scope of Delivery | BS500 weight plate storage rack, 6 adapters for 50 mm plates, 6 spring collars, weight plates not included |
Care Instructions
Wipe the frame and storage pegs with a damp cloth, then dry them thoroughly. Remove dust and hair from the casters occasionally and check that the bolts on the lower frame are securely tightened.
At a Glance
- 6 storage pegs with a 30 mm diameter, adaptable to 49.8 mm for 50 mm plates using the included adapters
- 2 vertical sleeves for barbells
- Accommodates weight plates with an outside diameter of up to 450 mm on every peg
- 4 ball-bearing heavy-duty casters with locking brakes
- Load capacity up to 300 kg, net weight 14 kg
Login
1 review
Von: Andrea · December 30, 2023 3:32 PM
Perfekt für meine Bedürfnisse!
Ich habe eine ganze Weile nach einer Möglichkeit gesucht, meine Oly-Bar und die Scheiben zusammen kompakt zu verstauen - und enflich die für mich perfekte Lösung gefunden: Mit je 2x 15, 10 und 5 kg ist der Platz noch nicht einmal zur Hälfte belegt, es dürfen also gerne noch weitere Geweichte folgen... Ebenso wie eine 2. Langhantel, die sich noch zusätzlich verstauen ließe! Am aller- allerbesten gefällt mir aber, dass ich die schweren Lasten durch die Rollen einfach jederzeit durch mein Homegym schieben kann, wo sie gerade am wenigsten im Weg sind für das aktuelle Crossfit-Workout - ich bin richtig verliebt in den Wagen, zumal der Aufbau wirklich kinderleicht war.