Plate Tower SQMIZE® BS400, 50 mm Weight Plate Roller Stand with Heavy-Duty Casters
Plate Tower SQMIZE® BS400, 50 mm Weight Plate Roller Stand with Heavy-Duty Casters
€125.95
% €170.95* (26.32% saved)
Available, delivery time: 2-5 Tage
Plate Tower SQMIZE® BS400 with Heavy-Duty Casters for 50 mm Weight Plates
The SQMIZE® BS400 plate tower stores one weight category on a single vertical peg. The plates are stacked flat on top of one another, allowing you to remove them individually from the top and put them back just as easily. The cross-shaped base is fitted with four heavy-duty casters, so you can position the tower wherever you are training.
89 cm Storage Height for One Weight Category
The peg provides 89 cm of usable storage height, accommodating 10 to 12 bumper plates weighing 20 kg each. Keeping each tower dedicated to one weight category means you always know where to find the right weight. With an overall height of 106.5 cm, even the top plate is within easy reach while standing.
Casters for Moving the Tower Under Load
Four ball-bearing heavy-duty casters, each 75 mm in diameter and 30 mm wide, support the tower. The steel caster brackets are chrome-plated. Two of the four casters feature locking brakes to secure the tower in position. The 300 kg load capacity applies both when stationary and when moving – you can transport loaded plates without removing them.
Frame and Storage Peg Dimensions
The cross-shaped base is made of 50 × 50 mm square steel tubing and distributes the load across a footprint of 53 × 53 cm. The storage peg has a diameter of 49.5 mm, allowing Olympic plates with 50 mm center holes to slide onto it without sticking – including bumper plates as well as cast iron and steel plates.
Technical Specifications
| Height | 106.5 cm |
| Width | 53 cm |
| Length | 53 cm |
| Storage Height | 89 cm |
| Storage Peg | Vertical peg, Ø 49.5 mm |
| Capacity | 10 to 12 bumper plates weighing 20 kg each |
| Frame Profile | 50 × 50 mm square steel tubing |
| Casters | 4 ball-bearing heavy-duty casters, chrome-plated steel brackets |
| Caster Diameter | 75 mm |
| Caster Width | 30 mm |
| Locking Brakes | 2 |
| Load Capacity | Up to 300 kg, both stationary and when moving |
| Weight | 13.7 kg |
| Scope of Delivery | BS400 plate tower, without weight plates |
Care Instructions
Wipe the frame with a damp cloth and dry it afterward. Occasionally remove dust and hair from the casters and check that the caster brackets are securely fastened.
At a Glance
- 89 cm storage height for 10 to 12 bumper plates weighing 20 kg each
- Vertical 49.5 mm peg for plates conforming to the 50 mm standard
- 4 ball-bearing heavy-duty casters, 75 mm in diameter, 2 with locking brakes
- Load capacity up to 300 kg, both stationary and when moving
- Cross-shaped base made of 50 × 50 mm square steel tubing, with a 53 × 53 cm footprint
Login
1 review
Von: Matthias · April 11, 2023 8:15 AM
Gutes Preis-Leistungs-verhältnis
Der erste Hantelständer hatte einige Transport(?)Schäden, der Umtausch erfolgte aber schnell und unkompliziert.
Der Ständer macht einen recht robusten Eindruck und die Rollen wirken hochwertig (es scheinen PU-Rollen zu sein, keine einfachen Kunststoffrollen).