Deadlift Barbell Jack SQMIZE® BJ-106
Deadlift Barbell Jack SQMIZE® BJ-106
€114.95
% €192.95* (40.42% saved)
Available, delivery time: 2-5 Tage
Deadlift Barbell Jack SQMIZE® BJ-106 for Fully Loaded Barbells
The SQMIZE® BJ-106 deadlift barbell jack lifts the barbell at two points simultaneously. Both ends of the bar remain accessible, allowing you to load plates on the left and right without setting the bar down in between. With a load capacity of 500 kg, the jack can handle a fully loaded barbell.
The frame measures 107 cm in length and 51 cm in width and stands on round steel feet. With a net weight of 13 kg, it stays firmly in place even under load.
Leverage with an 85 cm Handle
The handle is 85 cm long and has a diameter of 32 mm. Its extended length converts the force required at floor level into a short upward pull. The heavier the load, the more the lever geometry works in your favor. The handle is secured with an M12 bolt, while the reinforcement brackets at the frame joints use M16 bolts.
Heavy-Duty Construction for 500 kg
The frame is made throughout of 3 mm steel, while the reinforcement brackets have a wall thickness of 5 mm. All frame joints are welded; only the crossbar is bolted in place. The bolts and axle are reinforced because they carry the entire load.
Both bar supports are lined on all sides with 5 mm-thick nylon pads. The bar rests on plastic rather than steel, protecting the knurling and coating from contact. The clear opening is 48 mm wide, accommodating bars with thicker shafts as well.
For Every Exercise That Starts on the Floor
Deadlifts, hip thrusts, Pendlay rows, cleans: in all these exercises, the bar starts and finishes on the floor. The BJ-106 raises it to working height, allowing you to change plates while standing and continue training on your own.
Technical Specifications
| Length | 107 cm |
| Width | 51 cm |
| Height | 35 cm |
| Lifting Height | [Value to be added] |
| Handle | 85 cm, Ø 32 mm |
| Frame Profile | 50 × 50 × 3 mm |
| Steel Thickness | 3 mm throughout |
| Feet | Round steel |
| Reinforcement Brackets | 5 mm wall thickness |
| Bolted Connections | M16 brackets, M12 handle |
| Construction | Welded, crossbar bolted in place |
| Bar Supports | 2 support points, lined with nylon pads on all sides |
| Nylon Thickness | 5 mm |
| Support Opening, Clear Width | 48 mm |
| Load Capacity (Static) | 500 kg |
| Weight | 13 kg |
| Finish | Powder coating |
| Scope of Delivery | 1 piece |
Care Instructions
Wipe the powder-coated surface with a damp cloth and dry it afterward. Check the handle and bracket connections occasionally to ensure they are secure, and inspect the nylon pads in the supports as well.
At a Glance
- Lifts the barbell at two points, leaving both ends free for loading
- Static load capacity of 500 kg, frame profile 50 × 50 × 3 mm
- 85 cm handle with a diameter of 32 mm
- Supports lined on all sides with 5 mm nylon pads, 48 mm clear opening
- Welded construction with a net weight of 13 kg
Login
9 reviews
Von: Michael D. W. · November 21, 2024 2:43 PM
Macht alles einfacher!
Ich bin von einem einfachen Deadlift Jack auf diesen doppelarmigen umgestiegen und er vereinfacht die Sache enorm. Sobald nämlich die Gewichte größer werden, ist es mühsam, mit dem einarmigen DL Jack, den man immer zweimal ansetzen muss, die Scheiben auf- oder abzulegen. Preis und Qualität sind top und ich bin froh, nun mich aufs Trainieren statt aufs Umladen konzentrieren zu müssen.
Von: Kim T. · July 29, 2024 10:19 AM
Klasse
Sehr gut verschweißt. Sehr robust. Optimal zum be- und entladen
Von: Valentin Kreimeier · June 22, 2023 12:15 AM
Erfüllt den Zweck vollkommen
Einfacher Aufbau mit 2 Bolzen, die Pulverbeschichtung ist schick und der Jack ist stabil.
Erfüllt vollkommen den Zweck.
Die Haltefläche für die Langhantel ist gummiert um die Stange nicht zu schrammen.
Von: M. Hofmann · April 30, 2020 1:37 PM
Hervorragend
Ein hervorragender Ständer, auf dem sich die Langhantelstangen perfekt be- und entladen lassen.
Von: Martin · April 25, 2020 11:37 AM
Top Preis/Leistung
Die Beschaffenheit ist hervorragend, der Preis ist dafür super! Kann es sehr empfehlen, hält einiges aus. ;-)
Von: Henrik M. · April 14, 2020 10:52 AM
Tolles Produkt, klasse Deal
Sehr guter Barbell Jack. Ist stabil und hält problemslos alles aus, was draufgeladen wird.
Von: Oli · February 28, 2020 3:33 PM
Top Teil mit echtem Mehrwert
Was man damit macht sollte klar sein und das funktioniert einwandfrei.
Ist Baugleich mit dem Teil von Rogue, nur das dieses 2,5x so viel kostet wie das Teil hier.
Gute Verarbeitung, gute Pulverlackierung und funktioniert. Was will man mehr!
Von: Thomas Schießl · October 31, 2019 6:40 AM
Deadlift Barbell Jack SQMIZE® BJ-106
Suuuper Teil, so macht das trainieren Spaß
Von: S. Krepp · April 29, 2019 10:11 AM
Sehr gut
Hebt die Hantel wie er soll. Die Verarbeitung ist ordentlich und entspricht meinen Erwartungen.