Barbell Jack SQMIZE® BJ-86
Barbell Jack SQMIZE® BJ-86
The SQMIZE® BJ-86 Barbell Jack raises your barbell to working height, allowing you to load and unload weight plates while standing. Simply slide it under one end of the barbell and press the frame down. The bar rises and stays elevated until you have finished changing the plates.
Load and Unload While Standing
Deadlifts, cleans, snatches, rows, and hip thrusts all start on the floor. Without an aid, every weight change means tilting the bar and sliding the plates individually across the floor. The Barbell Jack takes care of this part for you: the bar is raised to working height, you change the weights while standing, and you can set up every set on your own.
The cradle engages the bar shaft directly next to the innermost weight plate. This means it works independently of the load – whether there are 60 kg or 250 kg on the bar. The jack is also useful for hip thrusts, as the bar remains elevated between sets, allowing you to position yourself underneath it from the side.
Cradle with Nylon Protectors
The U-shaped cradle is fully lined with nylon protectors. The bar shaft rests on plastic, leaving the knurling and finish untouched – even with daily use in a gym. The 5 cm cradle width accommodates bars of all types, including Olympic barbells.
Frame and Stability
The V-shaped frame is made of 50 × 50 × 3 mm square steel tubing and supports a static load of up to 250 kg. The lever geometry is designed to let you lift a loaded barbell with one hand. Rounded support feet at the rear provide a secure stance on both rubber flooring and hard floors while protecting the floor surface.
Weighing just 3.5 kg, the BJ-86 can be carried to the next platform with one hand and stored against the wall after your workout.
Technical Specifications
| Feature | Specification |
|---|---|
| Length | 67 cm |
| Width | 12.5 cm |
| Height | 33 cm |
| Lifting Height | 50 cm |
| Load Capacity (Static) | 250 kg |
| Frame Profile | 50 x 50 x 3 mm |
| Cradle Width | 5 cm |
| Bar Shaft Diameter | unrestricted up to 50 mm |
| Barbell Support | fully lined with nylon protectors |
| Finish | black powder coating |
| Weight | 3.5 kg |
| Scope of Delivery | 1 piece |
Care
Wipe the powder-coated surface with a damp cloth. Check the nylon protectors occasionally to ensure they are securely in place.
At a Glance
- Lifts a loaded barbell off the floor for standing plate changes
- Static load capacity of 250 kg, frame profile of 50 x 50 x 3 mm
- Cradle fully lined with nylon protectors, suitable for bars of all types
- Works independently of the weight resting on the bar
- Weighs 3.5 kg and can be moved with one hand
Login
1 - 10 of 14 reviews
Von: Andreas G. · July 28, 2026 6:28 AM
Bei schweren Deadlifts ein Segen.
Macht was es soll.
Von: Jan K. · July 25, 2026 12:08 PM
Simpel und gut
Einfaches kleines Tool was den Auf- und Abbau bei schwerem Kreuzheben und allen anderen Übungen, bei dem man viel Gewicht vom Boden heben will, sehr erleichtert und vor allem schneller macht.
Eine meiner besten Investitionen im Gymzubehör.
Von: Sören H. · February 27, 2026 1:00 PM
Hervorragendes Tool - Kaufempfehlung
Der Barbell Jack ist gut verarbeitet und sehr robust.
Absolute Weiterempfehlung um das Auf- und Abladen von Langhanteln zu vereinfachen.
Von: Wolfgang · March 31, 2025 11:51 AM
Barbell Jack SQMIZE® BJ-86
Der Barbell Jack perfekt als Hilfe zum Kreuzheben, macht es leichter Hantelscheiben zu beladen. Möchte ich in meinem Home Gym nicht mehr missen. Stabile Ausführung, top. 👍
Von: Ramon · February 22, 2024 5:46 PM
Top Teil
Habe mir den Barlifter gekauft weil er handlich ist und nicht viel Platz benötigt. Tolle Verarbeitung! Man muss halt aufpassen, dass man ihn richtig positioniert, da er sonst umfallen kann. Vielleicht wäre ein breiterer Fuß die Lösung. Funktioniert aber dennoch sehr zufriedenstellend
Von: Erick · September 10, 2022 7:55 AM
Super Tool fürs Gym
Ich hab mir den Barbell Jack als Hilfe zum Kreuzheben besorgt, da dass Beladen der Langhantel mit Bumperplates schon nervig ist.
Gut finde ich, dass der Standfuß breiter ist. So kann der Jack auch nicht umfallen. Er nimmt trotzdem nicht zu viel Platz weg.
Ich Trainiere im Homegym und da ist Platz ja rar.
Schade ist, dass nur zwei Seiten der Aufnahme durch Gummi geschützt sind, Ich habe mir mit Kabelbinder und nem Stück Gummimatte auch für die freie Seite einen Schutz gebastelt. Hält auch einigermaßen, aber schön ist anders.
Ich bin beim Heben der Langhantel schon öfter mit der Langhantel gegen den freien Bereich gekommen. Schade, dass dies nicht schon standardmäßig vorhanden ist. Bei den Mitbewerbern ist das nämlich so.
Von: Hans P. · May 19, 2020 7:26 PM
Empfehlung!
Erleichtert definitiv das Leben (speziell beim Rudern und Kreuzheben)! Empfehlenswert!
Von: Fabian Weber · May 14, 2020 6:10 PM
Mini Deadlift Jack
Funktioniert einwandfrei und nimmt wenig Platz weg. Eine gute Wahl für jedes kleine Home Gym.
Von: S. Scherer · April 23, 2020 3:07 PM
Sehr gute Qualität
Das Gerät verfügt über eine sehr gute Qualität und ist seine 30 € definitiv wert. Gerade bei etwas größeren Hantelscheiben ist es meiner Meinung nach ein absolutes Must-Have.
Von: Daniel · March 16, 2020 11:48 AM
Geb ich nicht mehr her
Die 30 € haben sich echt gelohnt. Die Scheiben werden ca. 2,5 cm über de Boden gehoben, das erleichtert den Wechsel unheimlich, absolute Empfehlung