Skip to main content Skip to search Skip to main navigation

Weightlifting Competition Bar – 20 kg SQMIZE® ELITE CLUB OB86WL-K

Weightlifting Competition Bar – 20 kg SQMIZE® ELITE CLUB OB86WL-K, Spring Steel

The SQMIZE® ELITE CLUB OB86WL-K Weightlifting Competition Bar is a solidly built spring steel bar designed for durability and years of enjoyable training. At its core are eight oversized Elite needle bearings that provide the spin required for weightlifting. Combined with spring steel featuring 220,000 PSI tensile strength and a full Hard Chrome coating, this bar is built for demanding training use.

Core Feature: 8 Oversized Elite Needle Bearings

Rotation is provided by eight oversized Elite needle bearings – without bronze bushings that could slow down the movement. This is exactly the setup required for weightlifting: during snatches, cleans and jerks, the sleeves rotate immediately and smoothly with the movement, allowing the bar to follow the lift rather than work against it. The oversized design provides additional smoothness and reserve capacity for continuous use.

Spring Steel with 220,000 PSI Tensile Strength

The OB86WL-K is made from alloy spring steel with a tensile strength of 220,000 PSI. The static load limit is 1,500 lbs (680 kg). In addition to chromium and molybdenum, manganese and silicon contribute to the high elasticity that allows the bar to flex back in a controlled manner during dynamic repetitions and return cleanly to its straight starting position.

Grip, Knurling and IWF Marking

The shaft has a diameter of 28 mm – the benchmark for weightlifting. The knurling is consistently tuned to medium sharp: grippy enough to provide maximum hold during heavy pulls without tearing up the palms during high-repetition training. Centre knurling has been omitted so that the bar runs smoothly across the neck during front squats and cleans. As a weightlifting competition bar, the OB86WL-K features the IWF marking at 910 mm.

Coating

Both the shaft and the barbell sleeves are fully coated in Hard Chrome, providing a very high level of wear and corrosion protection. The bar is sealed with high-quality SQMIZE® collars that securely enclose the sleeves.

Technical Data

Feature Value
Weight 20 kg (±0.4%)
Overall Length 220 cm
Straightness Tolerance 2 mm
Load Capacity (Static) 680 kg / 1,500 lbs
Shaft Diameter 28 mm
Grip Area (Inside Measurement Between the Sleeves) 131 cm
Knurling Medium sharp
Centre Knurling None
Markings IWF (910 mm)
Sleeve Diameter 50 mm
Loadable Sleeve Length 41.5 cm
Bearing System 8 oversized Elite needle bearings
Collar System SQMIZE® collars
Shaft Material Alloy spring steel (chromium, molybdenum, manganese, silicon)
Tensile Strength 220,000 PSI
Shaft Coating Hard Chrome
Sleeve Coating Hard Chrome
Intended Use Commercial Grade (Gym Use)
Dropping Drop-tested*
Warranty 24 months + lifetime warranty against bending**

Scope of Delivery and Care

Included in delivery is one Weightlifting Competition Bar – 20 kg SQMIZE® ELITE CLUB OB86WL-K. The bar is classified as Commercial Grade and is therefore designed for continuous use in commercial gym environments. It is delivered from the factory with a protective layer of oil and film – remove the oil with a dry, soft cloth before first use. For further care instructions, please refer to the enclosed leaflet and our information on 50 mm barbells on the website.

* Dropping is only permitted when using suitable solid rubber weight plates (bumper plates) and on flooring with a protected surface using drop mats.

** The warranty against bending requires proper handling of the barbell. It does not apply in cases of negligent or improper use. The warranty also becomes void if the bar is modified, improperly maintained or improperly stored. Dropping is permitted exclusively under the conditions stated above.

  • 28 mm spring steel shaft with 220,000 PSI tensile strength, loadable up to 680 kg
  • 8 oversized Elite needle bearings for excellent weightlifting spin
  • Full Hard Chrome coating with high wear and corrosion protection
  • Medium sharp knurling, no centre knurling, with IWF marking (910 mm)
  • Commercial Grade, drop-tested, 24 months + lifetime warranty against bending

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


1 review

Von: Hans-Jürgen G. · April 21, 2025 3:48 PM

Review with rating of 5 out of 5 stars

Sehr gute Qualität

Qualität und Verarbeitung sehr gut, ebenso das Preisleistungsverhältnis

Servus nach Österreich! 🇦🇹 Entdecke unser Sortiment direkt in unserem AT-Shop. Nutze Beratung und Kundendienst direkt vor Ort!